Partkeepr on debian _jessie_ – partkeepr wiki

PartKeepr is a web-based application. Database key types Multiple users can access a single copy of PartKeepr through any modern web browser. Database instance As such, to get PartKeepr working, you will need to set up a “server.”

This example will set up a standalone server whose sole responsibility is to provide PartKeepr. Data recovery raid 0 It will run in a Virtual Machine (VM) and will use Debian-8.3.0 (Jessie) Linux, Apache/2.4.10, PHP 7.0.3, and MySQL 5.5.47. Data recovery tools To keep the system minimalistic, this installation will not include a full graphical desktop environment. Database programming languages Your system need not be exactly as described here. Super 8 database PartKeepr is flexible and you can set up your installation as you wish.

Disclaimer: This step-by-step example is provided merely for informational purposes, in the hopes of helping others to get going with PartKeepr.


5 databases If you follow the steps described here, you do so entirely at your own risk. H data recovery registration code Be especially mindful that if your system will be exposed to the Internet or any untrusted network, you must consult with a security expert before deploying PartKeepr or any other technology.

Our example uses Debian Linux 8.3 “Jessie” as the operating system. Database link If you are using something else, such as a different Linux distro, a BSD system, etc., please install it per its installation guide and skip to the next section.

If using a different version of Debian Linux or if your hardware/network scenario differs from ours, you can use the following steps as a general guide but you may have to make adjustments.

Obtain the ISO file (CD-ROM image) of Debian Linux 8.3 “Jessie” from debian.org. Database google We used debian-8.3.0-amd64-i386-netinst.iso, which includes 32- and 64-bit versions.

Create a virtual machine in your virtualization platform of choice. Database update In this example, our virtual machine is created in VMware and has 2 virtual processors, 2GB RAM, 100GB hard drive space, although this is probably far more than is really required.

Important: On our virtual machine, we created two virtual network interfaces. Data recovery news The first (which will become eth0 in Linux) is set to share the host machine’s Internet connection via NAT. Data recovery austin The second (eth1) is set to host-only (and could later be bridged to our home or office ethernet network instead). Data recovery micro sd card We configured it in this manner so that we could test the system from a web browser in the host machine.

On the initial screen of the installer, select “Advanced options.” On the next screen, select “64 bit expert install” (if using a 64-bit system) or “Expert install” if using a 32-bit system.

In the following menu, select “Choose language.” In the next several screens, choose the appropriate language and locale, such as English, United States, United States en_US.UTF-8. Database relationship diagram In the screen that asks for additional locales, you may press Tab and select Continue if additional locales are not needed.

Select “Configure the network.” It should be safe to accept the defaults in the screens that follow. Data recovery services near me However, if you have configured the virtual machine with multiple network interfaces like we did, it is important that the one with Internet access be set as the primary interface. Database worksheet For Hostname, choose something appropriate (in our example, we chose PartKeepr).

Select “Set up users and passwords.” In the following screens, accept shadow passwords (Yes) and do not allow login as root (No). Database constraints When root login is disallowed, the installer will install sudo, create a user account, and add it to “sudoers” to allow administrative commands to be entered via “sudo.” Note that the installer will not do this if you choose to allow root login. Database vault Provide a full name for the new user, followed by a username for the account and a suitable password. Qmobile data recovery software In our example, we will set the full name and the username to “admin” but you can use any valid username. Tally erp 9 data recovery software Note that you will have to adjust several Linux commands we show later on to reflect the username you choose. 7 databases in 7 weeks Enter an appropriate domain name (in our example, we entered localdomain).

Select “Detect disks” followed by “Partition disks.” Since this is a virtual machine, this example will use “Guided – use entire disk.” If you are co-installing Debian Linux alongside other operating systems, you will need to make the appropriate adjustments in this step to avoid clobbering your other systems. 3 database models In this example, we accept all the defaults and choose “Yes” when asked to write the changes to disk.

Select “Install the base system.” The installer will begin copying files, which could take some time depending on your system’s speed. Database programmer salary When asked which kernel to install, accept the default (in our case, linux-image-amd64). Database developer salary When asked which drivers to include in initrd, choose the default (generic: include all available drivers).

Select “Configure the package manager.” In the screen that follows, accept using a network mirror (Yes). Data recovery agent For protocol, choose http. Data recovery usb flash drive Select a mirror near you (in our case, United States). Data recovery windows Select a Debian archive mirror (in our case ftp.us.debian.org). Database definition Leave the proxy field blank (unless you know of a need to enter something here). Data recovery definition The installer will spend some time retrieving files from the mirror. Database or database When asked, decline to use non-free software (No) and contrib software (No). Data recovery software windows Accept receiving security updates (from security.debian.org) and release updates.

Select “Select and install software.” The installer will retrieve some more files. Cost of data recovery When presented with “Software selection,” uncheck “Debian desktop environment” and “print server.” Check “web server,” “SSH server,” and “standard system utilities.” The installer will then fetch and install those components.

Select “Install the GRUB boot loader on a hard disk.” In our example, Debian Linux is being installed on a virtual machine where it is the sole operating system. Database first entity framework If your system differs, make the necessary adjustments here. Data recovery iphone 5 We selected to install GRUB boot loader to the master boot record (Yes), selected /dev/sda as the device for boot loader installation, and declined forcing GRUB to the EFI removable media path (No).

Select “Finish the installation.” When asked whether the system clock is set to UTC, we selected Yes. Raid 0 data recovery When prompted, remove the installation media and allow the virtual machine to reboot.

If sudo does not work at all, or if the system says that “this incident will be reported,” then you probably opted to allow root login when you installed. 7 data recovery serial key In that case, the installer did not install sudo or set up your user account to have sudo access. Database modeling To correct this, you must switch to the root user, install sudo, add your username to the sudo group, exit from the root user, log out, and log back in.

If the virtual machine has multiple network interfaces, it is possible that additional interfaces beyond the eth0 are not configured. A database record is an entry that contains If this is the case, /etc/network/interfaces needs to be adjusted.

If you have issues where domain names are not resolved correctly (for example, you cannot ping www.google.com) then you may have to adjust your resolver settings. Java database However, if you add lines to /etc/resolv.conf, those will be overwritten the next time you reboot or the next time dhclient runs. Easeus data recovery 9 serial What worked for us is to add a line to /etc/dhcp/dhclient.conf, instructing it to use additional nameservers beyond what is provided by the DHCP server.

Note: If you are using a more full-featured installation of Debian (with a desktop environment), you may have NetworkManager and will need a different solution. Iphone 5 data recovery software free See the following pages: [2] and [3].

To use a newer version of PHP than is available with Debian’s default repositories at the time of this writing, we add the DotDeb.org repositories:

Install the other needed packages $ sudo apt-get install curl ntp mysql-server mysql-client php7.0 php7.0-apcu php7.0-curl php7.0-gd php7.0-intl php7.0-ldap php7.0-mysql php7.0-dom php7.0-xml

Determine the IP address of the virtual machine. Database partitioning You can type “ip addr” at a prompt and look for inet. Database gif In our virtual machine, we set eth0 to share the host machine’s Internet via NAT and we set eth1 to host only, so we look for the inet address of eth1.

Launch a web browser in the host computer or on another computer with network connectivity to the virtual machine and enter the IP address. Database project ideas If you see Apache2 Debian Default Page with the message “It works!” then Apache is working. Iphone 5 data recovery without backup Otherwise, you will need to determine if a problem is caused by lack of network connectivity to the virtual machine or some misconfigured or omitted item from above.

We opted to set our PartKeepr installation’s ownership and permissions so that its files and directories are owned by our “admin” user and the “www-data” group. Bplan data recovery We set the files readable and writable by the owner and group, but inaccessible to everyone else. Data recovery boston ma It is necessary to give the www-data group write access to the files because PartKeepr requires the ability to modify its files.

The “www-data” group already exists in the Debian system. Ipad 2 data recovery If you are using a different operating system, you may need to check which group owns the web data files and make the appropriate adjustments in the commands below.

In the first command, the $(whoami) will be replaced by your admin user’s username, in case you opted to use something other than “admin” earlier.

Comment the line DocumentRoot /var/www/html by placing a # in front of it and add a similar line which points to /var/www/partkeepr-1.1.0/web.

In a web browser on the host machine or other machine with network connectivity to the virtual machine, type the virtual machine’s network address followed by /setup. Data recovery company For example, if the virtual machine’s network address is 192.168.10.10, type 192.168.10.10/setup.

If the PartKeepr setup wizard does not appear, one of several issues might be preventing it. Data recovery network drive There might not be network connectivity between your browser machine and the PartKeepr machine. Data recovery yelp There might be something missing or misconfigured in the steps above. Database join table Double-check the configuration. Google database Verify you know the virtual machine’s IP address with the “ip addr” command. Database quizlet Restart Apache with the “sudo service apache2 restart” command. Database synonym Or you can reboot the virtual machine with “sudo shutdown -r now” instead.

In the Prerequisites screen, PartKeepr performs tests to verify that it can run successfully. Database management jobs If any errors are shown, click the Show Errors button and try to correct the issues described in the popup window that appears. Iphone 6 data recovery free Most problems will be caused by having a version of PHP that is too old, not having all needed PHP modules installed, missing or incorrect web server settings, or incorrect ownership and/or permissions of the partkeepr-1.1.0 directory.

PartKeepr will ask for a code from the app/authkey.php file. Data recovery ubuntu If PartKeepr was installed in /var/www/partkeepr-1.1.0, that file will be located at /var/www/partkeepr-1.1.0/app/authkey.php. Database diagram tool It will be necessary to show that file’s contents, copy the auth key code (which is a string of letters), and paste it into the Authentication Key field in the web browser. Database field types In our setup, we cannot copy and paste directly because the virtual machine does not have a graphical desktop environment and we are running Setup from a web browser on the host computer. Data recovery best buy This leaves us with two options. Raid 5 data recovery We can either type:

to display the code and then manually type it into the web browser, or we can SSH into the virtual machine. Database administrator salary nyc If the host machine has SSH, then you can open a terminal on the host machine and type a command like the following, replacing “admin” with your username on the PartKeepr VM and replacing “ip_address” with the PartKeepr VM’s IP address:

Once the code is pasted or typed, click Next to show the Existing Configuration screen. Database p Since this is a new installation, there will be no configuration found.

Click Next again to show the Database Parameters screen. Cloud 9 database Select Database Type (in our case, MySQL). Data recovery on ssd Check the option to “Show commands to create the database.” This will display SQL statements that are incomplete at the moment. Database query tools As you fill out the other fields, the SQL statements will update accordingly. Database 2000 Set the fields as follows:

You will be prompted for the password you set when you installed mysql with apt-get earlier. Database business rules If all goes well, you will be presented with a “mysql>” prompt. Iphone 5 data recovery Enter the commands shown in PartKeepr’s setup exactly as shown, paying attention not to omit the semicolons at the end of each command.

Returning to the web browser, click Next to show the Setup (1/2) screen. Database implementation This should test for database connectivity successfully. Raid 1 data recovery software Afterwards, it will set up the database schema, part units, default footprints, SI prefixes, default units, and default manufacturers. Seagate data recovery Then, it should check for existing users. Database report Since this is a new installation, there will be no existing users yet.

Click Next to show the User Data screen. Data recovery specialist On this screen, create the PartKeepr administrator user. Data recovery iphone 6 Enter a suitable username, password, and email address. Database building Be particularly careful when typing the password as there is currently no field to type it a second time as a confirmation.

Below, in Authentication Method, there is a choice of HTTP Basic and WSSE. Data recovery top 10 WSSE is described as more secure. Database hosting However, some users experience problems with inability to log in due to the date and time not being correct in the virtual machine. Data recovery best Our virtual machine is configured to use NTP so WSSE should work. Data recovery program You can check the virtual machine’s current date and time using the “date” command:

If the date and time displayed are correct, then WSSE will probably work in your scenario. 7 data recovery 94fbr If you encounter problems, then you can rerun setup later and switch to HTTP Basic.

Click Next to show Setup (2/2). Database languages This will set up the admin user, save configuration files, move legacy files, and warm up the cache. Database ranking The last step takes a few moments. Data recovery youtube Wait for it to complete and then click Next to show the Setup Complete screen.

At this point, PartKeepr will ask you to set up a cronjob. 911 database Cron is a program that schedules tasks to run at given intervals. Data recovery download Please note that under Debian, cron jobs are configured a bit differently than other systems. Data recovery after factory reset Rather than add a line to /etc/crontab, we add a file in /etc/cron.d as follows:

Type the following contents, being particularly careful to copy the spaces and commas exactly. Database schema design (Spaces separate between fields, whereas commas allow placing multiple items into a single field — but only if there are no spaces after those commas!) Important: replace “admin” with your username:

This means: At minute 0 of hours 0, 6, 12, and 18, on all days of the month, on all months, on all days of the week, execute the file /var/www/partkeepr-1.1.0/app/console in the PHP interpreter under the admin user’s account.

Note that the line shown above is slightly different than what PartKeepr told us to use. Database uml The “admin” field was added. Data recovery ntfs This is because cron on Debian systems allows you to specify under which user’s account the cron job should run. Database error We prefer to run it as a regular user rather than root. Database functions Remember to replace “admin” with the Linux username you created during Linux installation.

banner